Fischer expansion bolts 10×80 with screws for BenchK ladders (12 pcs.)

Product description

The renowned German manufacturer of fastening systems offers DUOPOWER dowels – which guarantee very good fixing thanks to the use of 2 components: Depending on the base material, the grey element made of high-quality nylon automatically activates the optimal holding function (spreading, folding, rolling up) to ensure the best hold.

CATEGORY: BenchK 310, 710 SERIES

Duopower 10×80 plug with a 7×97 screw for a hexagonal head with an integrated washer. The expansion wings of the red element provide expansion and additional protection for the gray element. Easy screwing and precise pressing at the end. No risk of over-tightening the plug. The formed edge of the plug prevents it from falling into the hole. The set consists of 12 sets (plug with screw and cover), and is used in the following series:

• BenchK 310
• BenchK 710

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent functioning in different types of ground.
• Good feel for the complete expansion of the pin. You can feel exactly when the pin is properly secured.
• A small collar on the edge of the plug prevents it from falling into the hole during installation.
• The serrated shape on the side surface of the pin prevents it from rotating during installation.
• Increased anchoring depth makes the plug particularly well suited for mounting in hollow bricks, aerated concrete and plastered walls.

Application

• Concrete
• Solid bricks
• Solid silicate bricks
• Aerated concrete
• Bricks with vertical perforation
• Perforated silicate bricks
• Lightweight concrete hollow blocks
• Natural stone
• Solid bricks made of lightweight concrete

Assembly and operation instructions.

• DUOPOWER plugs are suitable for both pre-assembly and push-through assembly.
• The combination of two different plug materials influences their various properties (spreading, folding and looping), which allows for use in additional substrates and achieving the highest load-bearing capacities in them.
• The required screw length is the result of the dowel length + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and double-threaded screws can be used for dowels.
• When fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the element being fastened.
• Mounting to a wall less than 15 cm thick is not recommended.

Technical data